im going to my boat tomorrow i will try it again lol

Thanks Tim.
I just measured my boat and I think w/ the dimensions that Paul has given will work.
Just confirm w/ your measurements, thanks.

Come clean Tim you aint got a tape measure have you !

i had to borrow one from my friend who is a roofer... im a mechanic haha

i was able to take some pics tonight. a little blurry since i was a little tired from doing exhaust manifolds on a ford F-150 today. but you get the general idea

20" wide from end to end
13" tall on the slope
10.5" back to front
8.5" tall

last pic is of them installed in place so you can see how they fit. mine are not fastened in at all. but when i have the carpet in the boat they dont move in normal boating. when your in the rough water your feet keep them in place

thanks tim!
That definitely gives me enough to work with!
Gotta get out on the boat and run it a bit, then decide how i'm gonna want them sized.

where in long island are you? if all goes planned im going to be down there next weekend.

I live in Port Washington, which is north shore nassau county.
boat is in freeport which is south shore almost due south of PW.

Which TG you considering?

i used to live in huntington right off 110 across from the walt whitman mall. the boat is in Islip on the south shore. if i dont grab that one im heading to boston for a bat out of hell boat but we will see how it unfolds

How many boats you have lined up Tim? What does the bat boat look like?

its the 94 in mass