|
Look at post 53. Doesn't Lok like he used the brackets. But they wouldn't be hard to make.
|
If you magnify the photo he did use them. Kris may have had a set when he sold the boat.
|
Distance from stringer to the mount looks to be a lot longer than those plates. What boat do you need them for and what is distance between the stringers? I will look at mine tomorrow and see what they are like? Are you using that same standard merc mount on standard chebby block?
|
Originally Posted by OLD MAN
(Post 4580479)
I can see the aluminum stringer to pedistal brackets 2 holes on the top 3 holes on the side. By any chance would you have an extra set ? Thanks in advance for a reply.
|
Originally Posted by OLD MAN
(Post 4580497)
If you magnify the photo he did use them. Kris may have had a set when he sold the boat.
|
Thanks for getting back to me.
|
3/8th thick 4 inch 6061 angle is 55 bucks for a 4 foot piece at grainger. you need 2 feet tops and same amount of flat stock. and you can do better at any metal supply house. you were gonna have to re-drill anything you got used anyway.
|
Originally Posted by OLD MAN
(Post 4580563)
Thanks for getting back to me.
|
67.6 mph, 25 mirage plus, 4900 rpm, half tank by myself. light chop 2'.
66.8 mph 25 mirage plus, 4900 rpm, quarter tank, three guys (600lbs), 2-3 chop. https://scontent.fphl2-1.fna.fbcdn.n...7f&oe=5A5D97FC |
Nice ride
|
| All times are GMT -5. The time now is 01:46 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.