900 Hp Blower Motor Getting Ready
07-28-2003 | 10:56 AM
#11
Registered
Joined: Sep 2001
Posts: 2,287
Likes: 0
From: Houston, TX, USA
Originally posted by MYPANTERA28
THE GOOD THING THE KNOCK METER
DIDNT GO OFF, I HAVE SET AT #3.
THE GOOD THING THE KNOCK METER
DIDNT GO OFF, I HAVE SET AT #3.
08-02-2003 | 09:07 PM
#17
Thread Starter
Registered User
Joined: Oct 2002
Posts: 2,260
Likes: 0
From: MIAMI WHERE ELSE
BJM
I WENT OUT TODAY TURNED 5800 WITH A 32 BRAVO
NON LABBED AND HIT 98 SHE WAS SCREAMING
AND THE BRAVO HELD UP. I HAVE SOME FINE TUNNING
STILL LEFT TO DO MY TIMMING IS NOT ACCURATE.
NON LABBED AND HIT 98 SHE WAS SCREAMING
AND THE BRAVO HELD UP. I HAVE SOME FINE TUNNING
STILL LEFT TO DO MY TIMMING IS NOT ACCURATE.
Last edited by MIAMIBOYZ; 12-16-2003 at 03:16 PM.
08-02-2003 | 11:11 PM
#19
Banned
Joined: Aug 2002
Posts: 5,658
Likes: 1
From: IL
Beautiful
Great job Albert. Nothing like taking pride in your boat and doing the work yourself!!! You seem to have that thing dialed in well.
I could use some help. I'm running a 28P Bravo1 and can only spin it at 4650 RPM and 78 MPH GPS. Any ideas on what the problem could be? I should be able to spin a 28P faster than 4650. Here's more data:
http://www.offshoreonly.com/forums/s...threadid=55657
Not trying to steal your limelight Albert, just would like to know what you've done to set up your awesome boat! I won't hit 100 but should be in the 90's with my set up right?
I could use some help. I'm running a 28P Bravo1 and can only spin it at 4650 RPM and 78 MPH GPS. Any ideas on what the problem could be? I should be able to spin a 28P faster than 4650. Here's more data:
http://www.offshoreonly.com/forums/s...threadid=55657
Not trying to steal your limelight Albert, just would like to know what you've done to set up your awesome boat! I won't hit 100 but should be in the 90's with my set up right?
