Re: 28 Sit Down ??
 

No points off for mispelling on this thread!!!!!!!!

Re: 28 Sit Down ??
 

Phew!!

Thank GOd I sppelled everything correctly...

I'm getting so damn paranoid about posting..

Can't woory about spelling..whoops can't worry about speling 'spelling'..

Shoot......isd!!

Re: 28 Sit Down ??
 

Hey B:

876HP...I already left some water on the floor and had to change the underwear..

In fact, Whoops I crapped my pants...AGAIN!!

Re: 28 Sit Down ??
 

Finished up a little over 900 hp we were turning all the acessories so crank hp should be 920 or so even sea waterpump .Its gona be in boat soon probaly this week .

Re: 28 Sit Down ??
 

Now put about 9lbs. of boost to it and see what happens :D Good job Brian post some picks of the finished product.

Re: 28 Sit Down ??
 

turn it up big boy and let that dog hunt cause 6 lbs. ain't chit with a cooler

Re: 28 Sit Down ??
 

I hear ya lets see how it runs in the hull Im feeling its all that boat will want. the hull over 82 is becomeing real loose I cant imagine in the 90-s . I may look at raise 1 inch in the x and a 6 blade. More is better right . Lets rember this motor is 9.2 to one .You carolina boys dont run any compresion .

Re: 28 Sit Down ??
 

brian i did not know it was 9.2 we have run 9.0 but most of the time we run about 8.5 or 8.6 how much more did you turn the motor where did it stop making power

Re: 28 Sit Down ??
 

Duno we stoped at 6000 and it caried to that point I think it had 888 ft pounds at 5600-6000

Re: 28 Sit Down ??
 

Here's a recent photo of B-Stubb's baddd Azzz engine!!