Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Powerplay (https://www.offshoreonly.com/forums/powerplay-52/)
-   -   Cup Holders (https://www.offshoreonly.com/forums/powerplay/130188-cup-holders.html)

ActiveFun 05-15-2006 10:13 AM

Cup Holders
 
Does anyone know the sizes of the cup holders on 33PP? I have 3 white holders that are yellowing and wanted to order new ones before this weekend. The cup holders in the rear are smaller than the front and I haven't had a chance to measure them last weekend. Look at this link, looks like there are 3 sizes.

http://www.trickmarine.net/prodlist.cfm

dkwestern 05-15-2006 10:42 AM

Re: Cup Holders
 
I need one as well, I think the small kind for me.

XPRESS 33PP 05-15-2006 01:47 PM

Re: Cup Holders
 
[QUOTE=ActiveFun]Does anyone know the sizes of the cup holders on 33PP?

All 3 of mine are 3". My front and rear ones are the same.

ActiveFun 05-15-2006 02:33 PM

Re: Cup Holders
 
My two in the rear are smaller and the one on the port side is larger but I see 3 choices on Tricks webiste

XPRESS 33PP 05-15-2006 03:36 PM

Re: Cup Holders
 
I took mine out last week and ran them through the dishwasher to get the scum off the bottom They cleaned up nice. I know that mine were all the same size. Pain in the a$$ to get back in, there very tight with the material around them.

ActiveFun 05-15-2006 03:55 PM

Re: Cup Holders
 
Mine are loose to get in and out and ugly. I want blue to match my guages.

cowisl 05-15-2006 07:09 PM

Re: Cup Holders
 
Mine are white and are small. Need to replace them too. Group discount?

Full Throttle 525 05-16-2006 01:40 AM

Re: Cup Holders
 
Want new cupholders? Try www.danamarineproducts.com. They have all kinds and in two sizes...unfortunately for me, but Pantera installed the smaller plastic ones as well, so I'll have to make the holes bigger or look for smaller cup holders. I ordered Powder coated Red ones and they are too big... 3 3/8 are the smallest. My plastic ones are less than 3". Can get those cheap things at Boaters World or West Marine for $1.99.

These boat builders really know how to go all out for the customer. You would think that when you are paying in excess of $100k they could at least put in PC ones at no extra charge. Would have been a whopping $60 more. It will cost me more in time & labor to make the hole bigger. Oh well, welcome to the real world.

Indy 05-16-2006 05:56 AM

Re: Cup Holders
 
Ron...check Eddie Marine, they had some smaller ones last time I checked, not sure if they'll fit yours though but it's worth a shot.

Full Throttle 525 05-16-2006 08:39 AM

Re: Cup Holders
 
Thanks Indy, will do.

JROMY and I are expecting to run this summer, heard maybe you will too!! What do you have in the works? Would be real cool. You and yours are always welcome on my boat anytime. I have my little honey going with me lots this summer. Doing day trips. Will keep you posted.


All times are GMT -5. The time now is 04:32 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.