25 Twin Outboard, Toe In Or Toe Out
09-19-2009 | 08:02 AM
#1
Thread Starter
Registered
Joined: Mar 2008
Posts: 101
Likes: 0
From: st.thomas , v.i.
25 Twin Outboard, Toe In Or Toe Out
25ft. Powerplay,twin 300x.the Tie Bar Is 24 Inches With The Motors Parrell. I Would Like To Know More About Toe In Or Out And Which One Is Better For The Boat. I Am Goin To Use Some Bravos Or Chopper Props. Could You Let Me Know How Much To Open Or Close The Clevis End. Thanks Guys,
09-19-2009 | 07:20 PM
#3
Thread Starter
Registered
Joined: Mar 2008
Posts: 101
Likes: 0
From: st.thomas , v.i.
hi ed,i am trying to understand the toe in toe out concept100% .i have no brackets and one motor is counter rotation. i have a mayfair external steering. if the tie bar is 24 inches and the motors is paralell to each other, once i use the toe out concept , will the tiebar be 24 1/4 or 23 3/4? thank you
Last edited by kds; 09-20-2009 at 01:50 PM.
09-27-2009 | 10:06 PM
#7
Registered
Joined: Mar 2004
Posts: 470
Likes: 0
From: New Jersey
Having my mechanic do a few things to mine this week. One of which is setting the toe in by 1/4" as I'm swapping my prop rotation to swing inward.
Kds you should try the same as the boat will run faster with the props spinning in.
Kds you should try the same as the boat will run faster with the props spinning in.
09-28-2009 | 12:04 PM
#8
Thread Starter
Registered
Joined: Mar 2008
Posts: 101
Likes: 0
From: st.thomas , v.i.
k,my mechanic is doin the finishing touches to the boat so let me know how it runs .
