Powerplay 38 Hull glass placement You can see how nice this goes together no scissors needed the patterns were good.



http://i50.tinypic.com/jqn9qq.jpg

Powerplay 38 Hull Lamination Dave take a look at the roller how cleanly it works.


http://i49.tinypic.com/34edb9d.jpg

Powerplay 38 Deck Mold Spray up


http://i50.tinypic.com/fvv0wk.jpg

Powerplay 38 Deck Mold Spray up, I used a 2 Quart pot rig on this and everything else there and the boys had to hustle to keep me in front of the gel line chasing us, it was warm and I was a little over 2% MEKP .


http://i50.tinypic.com/2m85qo3.jpg

Powerplay 38 Deck Mold Spray up ,my Brothers batching and they had a couple tricks for keeping the system going.


http://i48.tinypic.com/15rgk5e.jpg

Powerplay 38 Deck plug at Mollicam facilities.

http://i48.tinypic.com/28u4o4m.jpg

Powerplay 38 Hull Mold Clean up and Wax started.

http://i50.tinypic.com/ajxqpf.jpg

I was noticing that, looks good. I like to see that sheen across the laminate that shows a good balance. What would you recommend these days for a fed roller system? Are there any specific brands you like over the others?

Mollicam still uses one of your decks in their add in Pro Boat Builder. I think its the Apache deck.

Powerplay 38 Hull Mold, I finished the polishing and it is now ready for wax I have a 5 step buffing system

http://i45.tinypic.com/25juvqo.jpg