Powerplay Boats
#133
Platinum Member
Platinum Member
Thread Starter
Join Date: Apr 2001
Location: Beautiful Fort Lauderdale www.cheetahcat.com
Posts: 10,833
Likes: 0
Received 6 Likes
on
6 Posts
Thank you for the nice reply, OSO is keeping this thread on target and I just want to show some pictures and do a little talking about what I saw.
#134
Platinum Member
Platinum Member
Thread Starter
Join Date: Apr 2001
Location: Beautiful Fort Lauderdale www.cheetahcat.com
Posts: 10,833
Likes: 0
Received 6 Likes
on
6 Posts
Up in the corners by the cutting flange we placed a stud on each side,when it was in the Trunnions and rotated a old 19" race tiebar held it vertical ,one guy could rotate it that was the Dannys rule on the balance.
#136
Platinum Member
Platinum Member
Thread Starter
Join Date: Apr 2001
Location: Beautiful Fort Lauderdale www.cheetahcat.com
Posts: 10,833
Likes: 0
Received 6 Likes
on
6 Posts
Another of the 38 Mold,the two front castor's we placed them inboard close together to kinda use the tripod effect so if it was on uneven floor or parking lot in this case the torsional stress would be less.
#139
Registered
Steve, thanks so much for sharing!