Who's Gotten Wet???
Gold Member
04-30-2006, 12:12 PM
#22
Platinum Member
Platinum Member
Join Date: Aug 2002
Location: Clinton IL. / LOTO 28mm
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who's Gotten Wet???
Originally Posted by Mentalpause
Hmmm, wonder if I can get more hours in than you?
And I probably won't start until July!
And I probably won't start until July!
Boat is not done yet, shed should be finished on Tuesday then here comes the rest of the stuff to do to it. Oh well if it is as nice in a couple of weeks as it is now we will have to partake in a cold one or two in the shed.
Rich.
04-30-2006, 07:20 PM
#25
Registered
Re: Who's Gotten Wet???
Originally Posted by PWRQWST
Had a small bo bo that I did 
, and a couple of others that were there when I got it repaired.
Rich.
, and a couple of others that were there when I got it repaired. Rich.
When is the "break the shed in" party?
05-02-2006, 09:02 PM
#28
Platinum Member
Platinum Member
Join Date: Aug 2002
Location: Clinton IL. / LOTO 28mm
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who's Gotten Wet???
Originally Posted by Mentalpause
We didn't mean to hit the side of your boat with that chain saw - we really were intending to go for the tree!
When is the "break the shed in" party?
When is the "break the shed in" party?
Rich.
05-20-2006, 07:57 AM
#29
Registered
Join Date: Jul 2005
Location: Byron Center MI
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who's Gotten Wet???
Im in the water/on the lift. Ran in 2 to 4 footers yesterday from Grand Haven to Muskegon and had a blast.
Summer is here
to bad its only 50..............
Summer is here
to bad its only 50..............
Last edited by powerquest 380; 05-21-2006 at 09:21 AM.
05-23-2006, 09:30 PM
#30
Platinum Member
Platinum Member
Join Date: Aug 2002
Location: Clinton IL. / LOTO 28mm
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who's Gotten Wet???
Got wet, never left the marina and put it back on the trailer. Found out I have a bad cam (number 5 exh lobe flat) and pulled both motors and having them being freshened up. The good thing is I'll be over 600hp when done
Rich.
Found out I have a bad cam (number 5 exh lobe flat) and pulled both motors and having them being freshened up. The good thing is I'll be over 600hp when done Rich.
