PowerQuest 222XL Dash Project
#1
Here's a pic of my recent winter dash project. S&S white gauges w/red needles and green back lighting set in silver carbon fiber and a Momo marine wheel. Of course here in Florida our winter is about over. Time to get it back in the water this weekend!!! (Does anyone know what brand throttle/shifters these are in the pic?, my thumb trim button is broken and I need to replace it, thanks in advance)
#4
Registered
Joined: Aug 2006
Posts: 4
Likes: 0
From: Ellenton, FL
Here's a pic of my recent winter dash project. S&S white gauges w/red needles and green back lighting set in silver carbon fiber and a Momo marine wheel. Of course here in Florida our winter is about over. Time to get it back in the water this weekend!!! (Does anyone know what brand throttle/shifters these are in the pic?, my thumb trim button is broken and I need to replace it, thanks in advance)
#5
I got the Carbon Fiber 3M decals from Ebay. Several sellers on Ebay although you need to ensure you get the good stuff that's thick and true 3M backed.
#6
Registered
Joined: Jan 2006
Posts: 42
Likes: 0
From: Holland,MI
Rich,
The 222xl and Raizor are not the same hull.The Raizor hull is the old 22 Precept hull with a re-designed deck on it. I know some 222xl's were built with carburated 454 mag's, which I beleive are 350HP. I haven't seen any 222xl's with more power than that, but that doesn't mean the boat won't handle more.
.
The 222xl and Raizor are not the same hull.The Raizor hull is the old 22 Precept hull with a re-designed deck on it. I know some 222xl's were built with carburated 454 mag's, which I beleive are 350HP. I haven't seen any 222xl's with more power than that, but that doesn't mean the boat won't handle more.

.
Thread
Thread Starter
Forum
Replies
Last Post
OBNOXUS21
General Boating Discussion
29
07-01-2003 05:50 PM




