Factory
#21
Registered
Joined: Aug 2006
Posts: 66
Likes: 0
From: Harrison Twp, MI
Thanks for the info!
#22
They should be able to tell you when they will shoot the mold if there is going to be a boat ready in July. I would think they would be shooting very soon.
#23
Registered
Joined: Aug 2006
Posts: 22
Likes: 0
hello i have a 340 viper -99 and live in sweden anyone now if i can bay some manuels on this boat there are tings i wont to now how it works.ac,toilet how to emty..and one ting more on the pq webb is nice strip on i think 380 in the front pages anyone now where i can bay stripes like that.. tanks for any help..
#24
rom32
There isn't a manual on the boat but you can get a manual on the motors and outdrive from BAM Marine
I had a 99 Powerquest for a few years and may be able to help you with some of your questions . Is there anything specific you are intrested in?
You can get some very general test results on the 34 by going to Powerboat Magazine web page and looking under test results.
There isn't a manual on the boat but you can get a manual on the motors and outdrive from BAM Marine
I had a 99 Powerquest for a few years and may be able to help you with some of your questions . Is there anything specific you are intrested in?
You can get some very general test results on the 34 by going to Powerboat Magazine web page and looking under test results.
#25
Registered
Joined: Aug 2006
Posts: 22
Likes: 0
tank you..but the engines and outdrives i have no problem becose i have totaly renovert and bildt 540cui on this engines.hope its gonne be nice..big problem its the toilett how u emty?? my toilett its like u pumpit out to a tank and then suckit up or pumpit out??? and then i have re paintit the boat so i need soom nice stripes like original.. tank u for ur time..
#26
tank you..but the engines and outdrives i have no problem becose i have totaly renovert and bildt 540cui on this engines.hope its gonne be nice..big problem its the toilett how u emty?? my toilett its like u pumpit out to a tank and then suckit up or pumpit out??? and then i have re paintit the boat so i need soom nice stripes like original.. tank u for ur time..
#28
tank you..but the engines and outdrives i have no problem becose i have totaly renovert and bildt 540cui on this engines.hope its gonne be nice..big problem its the toilett how u emty?? my toilett its like u pumpit out to a tank and then suckit up or pumpit out??? and then i have re paintit the boat so i need soom nice stripes like original.. tank u for ur time..
As far as stripes, hopefully someone on the forum knows a vinyl stripe provider that has the PQ patterns. If not, you may be able to take a picture of what you want to a local shop and have them make the stripes.
Good Luck.
#29
Registered
Joined: Aug 2006
Posts: 22
Likes: 0
i have a seperate tank for toilett and i have the cap waste.. so now i wonder some emty the tank in the sea.. but this one i have i must open" waste" looks like the gas cap and then suckit clean but whith what.. okej i understand maby i bring my lokal striper a picture
#30
Registered
Joined: Aug 2006
Posts: 22
Likes: 0
performancemary i wonder if i can call u i am from sweden and its so hard to whrite down so u understand i think its better for me to talk .. this is my email [email protected]



