Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Powerquest (https://www.offshoreonly.com/forums/powerquest-49/)
-   -   Who makes these exhaust tips? (https://www.offshoreonly.com/forums/powerquest/167118-who-makes-these-exhaust-tips.html)

Powerquest_Baby!! 08-25-2007 03:27 PM

Who makes these exhaust tips?
 
2 Attachment(s)
I had a little problem last weekend--one of my exhaust tips stuck closed and the whole left side overheated. At this point I either need to rebuild the tip or replace the tip (most likely what I will do)..Does anyone know who makes this tip and what the size or model is?

800XCR 08-25-2007 03:59 PM

They are made by Corsa

Fast Forward 08-26-2007 09:02 AM

I'm assuming you meant the silent choice stuck closed on one side?? I don't beleive these tips have any moving parts in them based on the exterior apperance. These are the mufflered tips.

Powerquest_Baby!! 08-26-2007 09:43 AM

They actually have 2 different flappers in them. One set it rubber and the other is metal. The metal flapper is now lose and the rubber one is damaged from the heat. So the pipe has to be fixed or replaced (cant believe corsa wants $400 for a pair of these!!)

Im still trying to get to the bottom of what happened and how to fix it. Originally thought the impeller went bad but we pulled the raw water pump yesterday and the impeller was fine (although we replaced it anyway).
Isnt there another water pump on the engine (a circulating pump)?

Fast Forward 08-26-2007 09:49 AM

Check on eaby for a set. If you go with anthing other than a Corsa you have about a 50% chance of the holes not lining up with other brands. I pulled my tips a year ago and they had no moving parts to burn out. If you ran into any shallow water you could have pumped silt into the system and plugged one side. Pull the thermostat as well and check it.

Powerquest_Baby!! 08-26-2007 10:19 AM

Brian, thats the wierd thing--I was in Lake Coeur D'Alene in Idaho and thats one of the cleanest lakes you will ever see. I was in the middle of the lake doing 40 mph and all of a sudden started to smell burning rubber. I couldnt have sucked up any silt, grass or anything else but there is definitely something preventing water from entering the right side pipe (if you were standing outside the boat and looking at the transom).
Ill check the thermostat but isnt there another pump on the motor?

Fast Forward 08-26-2007 06:06 PM

I'm not sure on your boat if there is a water pump in the drive or not? Sounds almost like an impeller came apart and maybe has wedged in a line somehere?

powerquest 380 08-27-2007 08:30 PM

I have 2 sets of these sitting in my barn off my 38. I would be happy to sell you a set, or 2, cheep.

Let me know if ya need em.

e-mail me at john goodrow / comcast. net

Powerquest_Baby!! 09-11-2007 01:05 AM

1 Attachment(s)
I knew I should have checked this post sooner!! I ended up sending the pipe back to corsa for repair but they called me last week to say it cant be repaired so Im having them send me a new one for $175..Im putting a new riser and exhaust hose as well..Hopefully that will do it and she will be running again..Only 1 poker run left for the year and then the party is over in Washington...
Guys Im here to tell you Ive received so many compliments on my legend its almost scary..I am the only PQ in Seattle and everyone that has seen the boat is just amazed at the quality..Its been a great summer!!

Busta1n2 01-07-2009 10:52 PM

ok someone please give me some info

My friend is looking to replace his tips which look exactly like the ones above....nothing like any of the boats which I have owned that have a flange on the outside with the 3 screws. For those of you who have added straight open tips are you just drilling holes on the outside???

He has a 26 legend

Fast Forward 01-08-2009 06:35 AM

I've seen them bolted and screwed in. Most now days are bolted but than again with the sealant we have now days I would have to belive using adequate size screws would do just as well. The Corsa tips seem like they have a bolt pattern thats a little off than most tips but there's still a chance whatever he buys may line up with the existing holes. Maybe someone else will chine in as to a brand that worked.

speed demon 01-08-2009 08:48 PM

1 Attachment(s)
I had my Corsa Mufflers swamped out in 2001 with no problem. I can't remember the brand of the new tip. Might have been Stainless Marine. I think I used the 6 inch tip. I also had the tabs added at the same time. Good Luck.

PQ26 02-03-2009 08:56 PM


Originally Posted by speed demon (Post 2773785)
I had my Corsa Mufflers swamped out in 2001 with no problem. I can't remember the brand of the new tip. Might have been Stainless Marine. I think I used the 6 inch tip. I also had the tabs added at the same time. Good Luck.

What motor are you running and how does it sound with those new tips? I am concerned with the water cops on Lake MI.

speed demon 02-03-2009 10:15 PM

It sounds awesome. A deeper and louder more prowerful sound. I have the 454 Mag efi 385hp. I thought the Corsa mufflers were too quite when running and still a little too loud when in no wake zones and trying to hold a conversation. I also added Corsa Silent Choice at the same time and route it through the prop in no wake zones. So far I have been left alone in Grand Haven, MI.


All times are GMT -5. The time now is 02:15 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.