I saw this on Ebay and thought Holy Chit!

http://cgi.ebay.com/ebaymotors/29ft-...spagenameZWDVW

Just curious what not to do.

I would stay soooo far away from that thing!!!!!!!!!!!!!! We had a boat to "finish" some small things on a boat that was briefly sunk and the motors were pickled and cleaned.? We finally had to pull the motors all apart to fix everything and clean it all again. Way too many electronics to work after being sunk!! Just my $.02, But I have been there.

Definitely not interested in buying it, Just curious what would do that kind of damage.

Seen that on Ebay and was curious as to what the story was.

Hey Robby, how are things coming with the boat? Who all is going to KY Lake this weekend? It doesn't look like we will be doing any boating soon. Hopefully it will dry up so we can get back in the fields and start planting again.

Boat is at geralds for about $2000 wirth of gelcoat work. I will be firing up the motors on the stands and breaking in parts. Then I have to take valve covers off and install inner valve springs after cams are broke in. Also painting drives and plates. I removed all of my tabs and filled the holes on the transom. Lisa Contis' mom has about all of my interior done, I am waiting on a piece of the back seat that is getting embroardered? I honestly hope that I have it ready for the KY. Lake poker run that I have already sent my money in for.!? So other than that i'm trying to get everybody elses boat ready for Mem. dal weekend. We will be at a baseball tour. all weekend. Thats about all for now, Hope to see ya on the water ssoooonnnnn!!!!!!!!!!!!!!

PICS PLEASE!!! Always interested in progress work. Let's jump start the PQ fourm!