Bomar Deck Hatch Part #
#1
Registered
Thread Starter
Bomar Deck Hatch Part #
Hoping someone else has the same size deck hatch (assuming they are all the same). I'm trying to locate a replacement due to a small crack. Anyhow the measurement on the top flange that is screwed into the deck is 20x20. the inside flange is 18.5 X 18.5. What I'm looking for is the part number. My sticker is missing and I'm having trouble locating one with out. If anyone could confirm the size and part number that would be great. Even made a few calls to PQ but I'm sure you know how that went....
#4
Registered
Try asking for Tracy West 603-826-5791 she seemed fairly helpful on the hatches and replacement parts. I just ordered and replaced the two mushroom caps on the outside of my front hatch with white ones. For what ever reason they were black when I got the boat and didn't really match with everything else being white.
#5
Platinum Member
Platinum Member
Join Date: Aug 2002
Location: Clinton IL. / LOTO 28mm
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
2 years ago we had someone walk through our front hatch, did not hurt the frame so I took off the hatch itself and took it to a sign shop and had them cut a piece of white plexy to the size of the hatch took it home drilled 2 holes for the handles and caulked the new piece in and let it dry for 3 days (just to be safe) It looks just like BOMAR and only cost me $12.00. Hope this helps you out, good luck.
Rich.
Rich.
#6
Registered
Thread Starter
Thanks guys. I ended up getting a complete new hatch. Should have just replaced the plex as Bomar is sure proud of their hatches $$$. But all in all glad I did the whole thing as it was an easy removal and install.