GPS mounting options
02-05-2010 | 03:32 AM
#1
Thread Starter
Registered
Joined: Apr 2009
Posts: 22
Likes: 0
From: Lafayette LA
GPS mounting options
Attempting to mount a Garmin 4208 GPS unit (moderately large) in a 290 Enticer. Considering using the lower "glove box" on port side and building up fiberglass to flush mount.
Any other suggested solutions. Pictures would be appreciated.
Any other suggested solutions. Pictures would be appreciated.
02-05-2010 | 06:01 PM
#2
Registered
Joined: Jan 2005
Posts: 4,820
Likes: 376
From: IL
The panel on the 290 is kind of tight but i think if you move some gauges around you should be able to mount a GPS in there.
I was able to move some gauges around in my 300 and install a GPS.
I was able to move some gauges around in my 300 and install a GPS.
Last edited by boatnt; 02-05-2010 at 06:03 PM.
02-06-2010 | 06:23 AM
#4
Registered
Joined: Jan 2002
Posts: 257
Likes: 2
From: Lake St Clair Metropark, Harrison Township, MI
02-06-2010 | 08:06 AM
#5
Registered
Joined: Jan 2005
Posts: 4,820
Likes: 376
From: IL
I think if you took and moved the two trim gauges in front of your shifter that should open up the panel and give you room for a gps
