Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Powerquest (https://www.offshoreonly.com/forums/powerquest-49/)
-   -   PQ General Discussion (https://www.offshoreonly.com/forums/powerquest/240354-pq-general-discussion.html)

verbi69 04-14-2013 03:47 PM

Aj knows.....

verbi69 04-14-2013 03:48 PM

Hey, does anyone have xr lowers for sale??
Really just need the housings but will buy them complete>
Thanks.
Mike

AJ POWERPLAY 04-15-2013 11:12 AM

PQ29- the first link fits the 290
PQ260- the second one fits the 280 and the 300, it tapers up in the rear

PQ29 04-15-2013 02:30 PM

Thank you!


Originally Posted by ajfisher (Post 3906074)
PQ29- the first link fits the 290
PQ260- the second one fits the 280 and the 300, it tapers up in the rear


boatnt 04-16-2013 03:54 PM


Originally Posted by verbi69 (Post 3905543)
Hey, does anyone have xr lowers for sale??
Really just need the housings but will buy them complete>
Thanks.
Mike

Mike
did you leave the outdrives up during winter???

verbi69 04-16-2013 08:37 PM


Originally Posted by boatnt (Post 3906872)
Mike
did you leave the outdrives up during winter???

No, when I was washing and waxing the boat getting it ready for its winter sleep I noticed that there was a crack running the length of the bottom of the bullet.
I have no idea how long it has been like that.
I'm wondering if this a weldable repair or if I should change out the case??

Pwraddr 04-16-2013 08:52 PM


Originally Posted by boatnt (Post 3906872)
Mike
did you leave the outdrives up during winter???

What does that do???

Need4SpeedGTCS 04-16-2013 09:16 PM


Originally Posted by Pwraddr (Post 3907075)
What does that do???

Any water not able to drain out of the case can freeze, expand and split the case.

Need4SpeedGTCS 04-16-2013 09:21 PM


Originally Posted by verbi69 (Post 3907067)
No, when I was washing and waxing the boat getting it ready for its winter sleep I noticed that there was a crack running the length of the bottom of the bullet.
I have no idea how long it has been like that.
I'm wondering if this a weldable repair or if I should change out the case??

Mike, was the oil milky when drained? If cracked for very long water could be drawn in as the drive cools. Look for corrosion on the internals. If you don't know how the crack happened be sure to check everything to make sure you're not just fixing a result instead of a cause.:poopoo:

Pwraddr 04-16-2013 09:23 PM


Originally Posted by Need4SpeedGTCS (Post 3907096)
Any water not able to drain out of the case can freeze, expand and split the case.

I see, thanks!


All times are GMT -5. The time now is 12:28 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.