34 vyper filler cushion
 

I am looking for a white vinyl filler cushion for a 2002 34 vyper.Does anybody know of one for sale? Or if anyone knows were i can get one? Also If someone can post a picture of the filler cushion, intalled between the u seating area and maybe the bottom of it and how it mounts, so if i need to make one myself. Thanks.

I have filler cushions in my 290... they are mounted with dowell rods across the opening and when not in all u can see is the mounts. They are filler cushions cut length wise so its easier to remove, I can take pics soon, would be easy to duplicate

I would like to see that too. Table and post (& mount) easy enough to build but how does the table/cushion piece fit in level with the seating. Where does the cushion store? Table has a spot under the v-berth...does the cushion cram in under that?

My 270 is the same as the 290, rods run across the seats then the seat bottoms and backs all lift and move in.

Here's a pic....

Do you have pictures were and how the rods mount in place between the u seating? If you can post them ,that would be great. I want to make sure I know how to do this, so I can make a table & filler cushion.
Thank you.

All the pic's I've seen on the net it looks like the 340/380's just use a shorter table post. Look of the hardware and lots of surfing I think the brand is Taco Metals Marine Products (yes Taco). West Marine sells their stuff but my question is wihich model, the post is it 60mm or 76mm diameter? base diameter?

Verbi, got a measuring tape handy? also, how tall is each tube?

Piersupply.com has some good prices and better choices/descriptions.

My cushion sits on the table which uses the shorter table post.
Can't tell you what size/ length until I get the boat home...

Verbi, appreciate any all info whenever you can send it.

With my schedule and weather out here I won't see my boat until the end of June...:eek:

No prob, anytime.
I'm in the same boat as well as far as weather goes......:picard1:

Does anyone have their boat home yet and could you please post pictures of the table and filler cushion for a vyper 34. I need to make one and the pictures would help.
Thanks.

I'm still a couple of weeks away from getting the boat.....sorry!!

A buddy of mine has a Vyper I'll check with him and see what I can come up with... darn Verbi is just too damn slow gettin that poker runner home!:p

Hi There.

Instead of the dowl rod approach (which my 29 had), I built a PVC frame for the filler cushion.

I did a paper template to have the cushion made. Used the same template for a 3/4 plywood base. Kept the base separate from the cushion for ease of storage and moving around. I put the plywood based on the cushions in the vberth and throw the filler cushion anywhere to get out of the way.

Basically the pvc base is in the shape of 2 Hs connected togther. Works great. I just fit the base together when needed and take apart to store.

If interested send me your email address and I will send some pictures.

Jeff

Verbi69 , Do you have your boat home yet? Can you post some pictures of the table and filler cushion and show how it mounts as a table and a cushion. What keeps it in place, and is ther a shorter poll for the cushion, like you use for the table?

Yes the boat is home but it's in a garage 15 or so minutes away from me....sorry I had forgotten you were looking for pics.
I'll head there tomorrow after work and snap some shots.
There is a shorter pole that attaches to the table.
I'll post them up tomorrow.

P.S. take a measuring tape too!

P.S.S. pic's of your boat and tow rig together look great!

Will do and thanks!
I had a Leer fiberglass tonneau cover put on yesterday, it's starting to come together!!
What do you want measured, the pole?

Taco Metals sells two diameters of parts...and the height of each pole (I won't write length...AJ will comment again :eek:)

Thanks.

Found a F450 Lariat here in Edmonton (but white of course), just too rich for me right now until the 270 sells.

Damn, I didnt get a diameter of the pipe but it is the same size if the table is there.....good call on the length thing!!

I would have liked a white F450 with a black interior......

Length of the pole is 15-1/4" end to end.........

This pic is a little clearer...

Thanks for the info!

The two options/projects that I want to add...table and then shower. Marinas out here have limited facilities...

No problem, let me know if you need more pics...

Is the filler cushion just supported by the pedestal or does the table top slide under side cushions to support the ends? Thanks for the pictures that shows me what I need to do.

The table table attaches to the pedestal which then sits into the floor, throw the filler cushion on top of the table and there you have it.
Not the most sturdiest imo though.

Does Anyone Have A Table & Filler Cushion They Want To Sell?

Hey Verbi, I see the one is 15.25 inches. What diameter? Also, what length for the table?

Thanks!

Hey Keith,

I bought the OEM parts for the table minus the table top (and short tube, no longer avlb). The tube is 76mm or 2.99" od., tapered on the bottom to fit in the base and a collar on the top for the table support to clip onto.

Taco Metals p/n's
Table Support Z20-3161PCS76MM
Table Column Z76-7143VEL13.25-1
Table Column Z76-9271VEL28.63-1
Table Base Z10-4080BLY76MM
Flush Mount Table Base Plug Z10-4016DEL76MM-A

Special order through West Marine.

Hello,

Thanks.

What do you mean short tube no longer available? I see you have the short tube listed??

I will look into this, wife says my daughter can't sleep on the floor.

I found all the p/n's on the Taco Metals' website but they don't sell retail. They referred me to WM; I gave WM the p/n's but when they quoted the prices they told me the shorter tube was NLA. Since the table was my only priority I didn't look any further for the short tube. If I need the second berth then I could alway get another long tube and have it cut down.
I just did a cut n paste to give you the p/n's.

Ahhh, got it, thanks!

I thought the same, buy bigger and cut it down so it is 100% the correct length.

Appreciate the help, another project for the list!!!

Good work boys.

Ok, so I have a few of the parts.

-table
-table column long
-table column short (longer but I will cut down)

Still need the rest.....

Ok, now have everything.....well, should be at my home next week.

Cut the hole in the floor and then haVe the cushion made.

Be sure to post some pictures...and I'll pick your brain when I go to do mine:D

Yea, no problem. What pics would you like??

Also, I bought the table top off eBay, same one they used in the boats. Emailed them direct and offered 100 shipped and they accepted. They now have 7 left, just an FYI. I bought one of the poles from them too for 40.

Then, the piece in the floor, the bracket that attaches to the table top. And the plug that covers the hole in the floor piece when not in use I got online from Fisheries Supply in WA. 140, free shipping.

The other needed pole was an eBay find too for 35.

So for all pieces to do the table and bed EXCEPT for the cushion cost me 315 bucks. Not too bad.

Just curious about drilling the hole in the floor...also, thought you were building, not buying the table top. Thanks for the info...located and ordering a table top ASAP!

Ok, I have the hole half assed figured out in my head. I need the boat, and the parts to confirm my plan. Either way, I think it will be easy.

I intended on building the table top, but when I saw them on eBay even at the asking price of 124 bucks I knew my time and materials would be way more than that so I just bought one. ( also, I think it matches the counter top in the boat already but not real good with colors )

My wife moved this task up on the priority list so I think I should be complete within a month. ( no it won't take a month but need a free Saturday afternoon )

Okay, so I ordered the table top this morning...

Extremely happy to have the OEM piece! :bunnydance:

Thanks for the tip; next time I'm in the Motor City beers are on me! :ernaehrung004:

Nice! Glad you were able to get one. Mine shipped and should arrive Wednesday. The bracket and rest of the stuff will be here Thursday.

Do you get to Detroit often? We can definetly do beers!

PS. What is your name, LOL.