New Avenger!
#23
Registered
Joined: Apr 2008
Posts: 2,771
Likes: 1
From: Sudbury Ontario
#25
Thread Starter
Registered
Joined: Nov 2006
Posts: 80
Likes: 0
Update: We received the AC unit so will begin on that install soon. Boat is off the trailer so I took that opportunity to replace all the carpet on the bunks. What I thought would be a simple job turned into a bit more work than anticipated. There are 14 bunks on this trailer and wrapping them is like wrapping x-mas packages which I am not too good at! So, I took my time and am really happy with the results.
The custom gel we ordered to fix the two small stress cracks does not match as well as I would like. My gel guy did perfect work, but the shade is just slightly off. We are sending the gel back to be re-mixed and will spray again. Pics to follow soon.
The custom gel we ordered to fix the two small stress cracks does not match as well as I would like. My gel guy did perfect work, but the shade is just slightly off. We are sending the gel back to be re-mixed and will spray again. Pics to follow soon.
#26
I got the correct gelcoat # at home in Ky. If you need it I can call home and get my son to write it down and give me a call and then post number here. I just ordered a whole gallon this past September.
#29
Thread Starter
Registered
Joined: Nov 2006
Posts: 80
Likes: 0
Shawn D: If you look in the responses to your post on air just above this, 5 responses in, one of the guys posted a link to my install thread. The picture you seek is in that thread. If you need one with the valve installed, I can get that for you.


