carpet in Old 23 powerplay removal of floor ?
#14
Registered
The outboard sections of the floor will be glassed in place.
#15
Registered
iTrader: (1)
Powerplay is what J owns...
Power Play is what PowerQuest started out as...
as far as the carpet ..I would start by removing the front seats and cutting all around the edges,remove old carpet...prep floor/wood apply glue and roll out new carpet....take a new painters roller and roll on top of new carpet with even presure to get a nice smooth finish..
Power Play is what PowerQuest started out as...
as far as the carpet ..I would start by removing the front seats and cutting all around the edges,remove old carpet...prep floor/wood apply glue and roll out new carpet....take a new painters roller and roll on top of new carpet with even presure to get a nice smooth finish..
#17
Registered
Thread Starter
Join Date: Mar 2001
Location: BIrmingham, MI, USA
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
Ok guys, my boat is the exact same thing as SPAZ BOB'S photo.. ( not as clean) but if you can picture that floor being broke into thirds. One third with the passenger seat, one third where the Gas tank access and the other third for the other seat. All pieces are going lengthwise.
Thank you
Thank you