I would like to get a microwave to fit in the hole where there used to be one. Was wondering what they came with.

Im sure they're discontinued but maybe i can get the spec's similar for a new one.

Thanks.

LOL, mine broke and trying to find a suitable replacement.....so far no luck. The original has a very short height.

I have the number but couldnt find any. I can post up later.

Was going to start a thread later and ask the same.

HELP US BOTH!!

Mine is a Vyper.

Thanks for the help, Keith! I think I'd use one quite a bit.

Fellas,

My original was a Sanyo EM-n107W.

Upon removal, I noticed they took the "feet" off the back edge, they were left on the front.

They "mounted" it by a mound of 4200 or equilivant. I had to use a saw on the top to cut through it.

Also, the fiberglass panel was cut out behind the microwave to allow more depth.

Just can't find one that low height.

A public thank you to anyone that leads to procurement of a new microwave is being offered!

Pretty sure my 1997 380 is a Samsung. I will be tinkering over the holiday weekend and will get you a PN.

My Avenger has a Gold Star brand for what it's worth.

From what it looks like by my little search time, any .6/.7 cu ft. microwave that was around 10" tall is discontinued.

The Sanyo model posted above dimensions are 18-3/16 w x 9-13/16 h x 13-13/16 d.

edit:

I found this with a little more digging this morning - http://www.bestbuy.com/site/emerson-...&skuId=8801093

17-1/8" w x 10-1/4" h x 12-9/10" d

Great Lakes Skipper has some Sylvania 0.6 cu/ft units with similar dimensions; although black not white...
Have you tried any R/V dealers?

Yeah, we just had to make the openings for the Micro's bigger on all the new Tiara's too.

The opening I don't think will accept 10 inches. My dad is retired, I'm sending him to measure some at stores. I've noticed that the advertised dimensions are not entirely accurate.

Also, as I mentioned, PQ remove the rear feet to lower even more.