![]() |
Another BIG thanks to Throttle-Up!!
Thanks to Matt and Julie on another job well done. I bought a used set of 28P Bravo1's last fall and tried them out on my Bullet. The starboard one would spin to 5000 and the port to 5200. I sent them down to Throttle Up and they determined that one of the props was 1/8th of an inch smaller in diameter than the other. They were also in pretty rough shape. I told them that I wanted to spin them @ 5500 WOT.
I'm not sure exactly what they did, but I tried the props out for the first time this past monday. I picked up 1-2 mph at 3500 and 4000 rpm's and ran the exact top speed as my other set of props (26P @ 5600) and , get this.....the WOT rpm's of these props was 5500!! Exactly what I asked for!!! Great customer service brings people back for repeat business. Keep up the great work!!! :) :drink: :D :evilb: :evilb: Craig Hall |
Re: Another BIG thanks to Throttle-Up!!
Craig,
We want to thank you, for the opportunity to work with you and look forward to working with you again! Thank you. Julie |
Re: Another BIG thanks to Throttle-Up!!
Julie - I'm next.
|
Re: Another BIG thanks to Throttle-Up!!
Hello Danny,
I hope all is well. Give me a call anytime. Julie |
Re: Another BIG thanks to Throttle-Up!!
Smitty got my boat now doing some upgrades. I will get a chance to run it at Cape Cod b/c I am the pace boat. Will send them to you or call you to discuss what I need after that weekend.
I hope all is well with you and Matt! Dan |
| All times are GMT -5. The time now is 06:41 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.