Thanks to Matt and Julie on another job well done. I bought a used set of 28P Bravo1's last fall and tried them out on my Bullet. The starboard one would spin to 5000 and the port to 5200. I sent them down to Throttle Up and they determined that one of the props was 1/8th of an inch smaller in diameter than the other. They were also in pretty rough shape. I told them that I wanted to spin them @ 5500 WOT.
I'm not sure exactly what they did, but I tried the props out for the first time this past monday. I picked up 1-2 mph at 3500 and 4000 rpm's and ran the exact top speed as my other set of props (26P @ 5600) and , get this.....the WOT rpm's of these props was 5500!! Exactly what I asked for!!!

Great customer service brings people back for repeat business. Keep up the great work!!!

Craig Hall

Craig,

We want to thank you, for the opportunity to work with you and look forward to working with you again! Thank you.

Julie

Julie - I'm next.

Hello Danny,

I hope all is well. Give me a call anytime.

Julie

Smitty got my boat now doing some upgrades. I will get a chance to run it at Cape Cod b/c I am the pace boat. Will send them to you or call you to discuss what I need after that weekend.
I hope all is well with you and Matt!
Dan