Hdyromotive P5-X
07-27-2005, 01:01 PM
#1
Registered
Thread Starter
Hdyromotive P5-X
I am happy to say that the Hydromotive P5-X props are now available in a 23P and 24P!!!!!!!!!!
This is great news for those of you running 26P Bravo I porps that had some interest in 5B'x.
Julie
This is great news for those of you running 26P Bravo I porps that had some interest in 5B'x.
Julie
07-30-2005, 07:48 AM
#2
Registered
Join Date: Feb 2001
Location: Big Rapids, MI
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hdyromotive P5-X
Hi Julie,
I have a question for you, I presently have Merc Bravo I 4 blade 28P props (inward turning) on my 2000 Powerquest 380 Avenger(approximate weight fully loaded is 11,500lbs.).
X dimension is 17 1/2"(or about 4" below the hull) Top speed with my dinged up props is 72-73mph.
I would like to get another set of props that will hold even better in rough water, would the hydromotive P5 X's work here? Would I need to go down in pitch with this prop ( currently running to the rev limiters), I am much more concerned about rough water performance than top speed!
Thanks, Paul
I have a question for you, I presently have Merc Bravo I 4 blade 28P props (inward turning) on my 2000 Powerquest 380 Avenger(approximate weight fully loaded is 11,500lbs.).
X dimension is 17 1/2"(or about 4" below the hull) Top speed with my dinged up props is 72-73mph.
I would like to get another set of props that will hold even better in rough water, would the hydromotive P5 X's work here? Would I need to go down in pitch with this prop ( currently running to the rev limiters), I am much more concerned about rough water performance than top speed!
Thanks, Paul
Last edited by boathead; 07-30-2005 at 08:03 AM.
08-02-2005, 01:57 PM
#3
Registered
Thread Starter
Re: Hdyromotive P5-X
Yes, Paul it is possible the Hydromotive P5-X may achieve your goal. You will indeed drop 1 inch of pitch from the actual pitch of your current propeller. So in Your case the Bravo I 28P is actually approx. a 27P so you would need a 26P P5-X. They are readily available.
Julie
Julie
Charter Member
08-08-2005, 03:03 PM
#5
Registered
Thread Starter
Re: Hdyromotive P5-X
Hello Mark,
The 23P P5-X props should runn 400 RPM higher than Brian's 25P, assuming his are stock. Unforunatly we don't have them for testing purposes, but this is what it sounds like you need.
Julie
The 23P P5-X props should runn 400 RPM higher than Brian's 25P, assuming his are stock. Unforunatly we don't have them for testing purposes, but this is what it sounds like you need.
Julie
