Arneson prop trade?

Reply Subscribe

Thread Tools

09-28-2006 | 10:05 AM

IRONMAN

Thread Starter

Charter Member

Joined: Jan 2001

Posts: 1,237

Likes: 2

From: south east of dome island

Arneson prop trade?

Does anyone have a LH 16 by 23p or something close, arneson prop that I could try or trade for a RH of the same? Thanks, Chris

09-28-2006 | 10:28 AM

The Menace

Registered

Joined: Nov 2002

Posts: 3,029

Likes: 2

From: Bonita Springs, Florida

Re: Arneson prop trade?

I have a LH and RH set of 4 balde Rolla's for a #8 that I would be willing to sell. I beleive they are 26's or 28's which could be cut down.

09-28-2006 | 06:14 PM

IRONMAN

Thread Starter

Charter Member

Joined: Jan 2001

Posts: 1,237

Likes: 2

From: south east of dome island

Re: Arneson prop trade?

Thanks but I forgot to specify ASD6 shaft. 19 spline.
so true about cannot put a price on boating i like that one

Last edited by IRONMAN; 09-28-2006 at 06:15 PM. Reason: add

09-28-2006 | 10:01 PM

Rik

arneson-industries.com

Joined: Jan 2001

Posts: 2,782

Likes: 7

From: California

Re: Arneson prop trade?

Quote:

Originally Posted by IRONMAN

Thanks but I forgot to specify ASD6 shaft. 19 spline.
so true about cannot put a price on boating i like that one

Is your shaft a short shaft 4" hub or the long hub 6"?

Measure from the start of the large diameter of the tape back to the end of the splines. If it is greater than 4" you have a long hub shaft.

I make the 19 to 26 tooth spline adapters. This will open your world to the Mercury SSM#6 propellers if you have a 6" spline shaft.

Rik