Prop Slip on a 24 Warlock Euro?
10-06-2006 | 09:59 AM
#12
Registered
Joined: Feb 2003
Posts: 2,952
Likes: 0
From: SML VA
Re: Prop Slip on a 24 Warlock Euro?
i can feel a huge diff when i run my stock prop at 4700 then i use my labbed prop at 5050, i know the labbed prop will of course be faster but the feeling the boat gives at around 4900 -5050 is that's where it likes to be, it almost like another gear.
10-12-2006 | 06:41 PM
#14
Thread Starter
Platinum Member
Joined: May 2006
Posts: 230
Likes: 6
From: Entiat, Washington
Re: Prop Slip on a 24 Warlock Euro?
Thank-you Julie / Throttle-up for setting me up with a labbed bravo prop. would a CNC prop work better for my boat? Is it to late? Rick Andersen
10-12-2006 | 10:25 PM
#15
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Re: Prop Slip on a 24 Warlock Euro?
The best prop on the boat is the best prop. CNC'd propellers will not give you the best performance all the time. I don't mean or attempt to say CNCing wont be the best in any given situation, I just know from years of experience, it takes more than bolting on a CNC'd prop to give the best performance. Minor personal hand held adjustments make the difference. Catch all statements are short lived.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Last edited by bbladesprops; 10-12-2006 at 10:28 PM.
