|
no prices on this thread:(
|
BZ have had no time to even think about it. I trust you. :D
What does Shogren say? |
3 Attachment(s)
Originally Posted by Panther
(Post 2080355)
I have a set of 32's if someone needs them. I have no idea if they've ever been worked or not, you would have to get them checked out.
I'll sell cheap, just wanna get rid of them. They're already in a boxes just need shipping labels... No warranty, as is, no guarantees..... |
We have 12-14 new, not used un-touched 32's.
Scott Shogren 847-336-9037 |
Bob,
Be careful with the 5 and 6 blade props on your 42X. That's alot of prop for Lk Mi (lots of bite on a heavy boat). Fountain has spent alot of money testing props. In order for the set up to work properly you need to go with shorty sportmasters and should consider Herring or five blade Maximus "Lab Finished". Be careful not to throw good money at bad. Scott Shogren www.chicagofountain.com |
Bob Z,
We'll gradly take you on with our Lab Finished Maximus propellers. johnnyboatman, sorry we sold the RH B!. Still have the LH. |
Originally Posted by bbladesprops
(Post 2082063)
Bob Z,
We'll gradly take you on with our Lab Finished Maximus propellers. johnnyboatman, sorry we sold the RH B!. Still have the LH. |
Originally Posted by bbladesprops
(Post 1990233)
We have used Labbed 34's. Sorry no used 32's right now.
Have any labbed 34's that will not blow out while coming up on plane? You flat pitched my 32's and removed a tad bit of cup for my 38 Top Gun. They run good, but I think there is more speed to tbe had. The 32's just touch the rev limiter @ 5600rpm 93 - 94 mph. Would like to run labbed 34's @ 5500. Your thoughts? price? Bill R Va. Beach, Va. |
BZ,
This is fun. Can we at least match diameter and difusser length. We won't Lab it, just make them closer to equal. Hi Bill R. Yeah, there is a story behind the 34 B1's. I may have told it to you. Anyway, we can fix the planing blow out problem with these props. Looking at your old file and the work we did does show you are a 34 B1 candidate. $1690.00 for the set complete (new, Labbed to your spec., in the box with hub kits). Always nice to hear from you Bill! Brett |
Originally Posted by bbladesprops
(Post 2082892)
BZ,
This is fun. Can we at least match diameter and difusser length. We won't Lab it, just make them closer to equal. Brett |
| All times are GMT -5. The time now is 07:51 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.