![]() |
BBlades hits the target!
My Velocity VR1 likes both Hydromotive and Bravo 1 props. Hall's Propeller labbed a Hydromotive Q-IV 27" and then tweaked it a second time to allow me to reach my HP peak at 53-5400 rpm. Brett at BBlades thought he could get me more speed with a labbed Bravo 1. I started with a stock 28" to get a baseline. After labbing, he made one more adjustment for bow lift and max rpm. Running within minutes of each other in three different directions, the Bravo 1 was exactly 3 mph faster on GPS than the labbed Hydromotive. Actually, the Bravo 1 was hitting the rev limiter at 5500 rpm, so there may be even more speed there. I wanted to get to 80.0 and got 81.7. Thanks Brett!
|
Theirs only a few good prop shops around. All my local guys can make them look pretty but for speed I go the BBLADES and his crew. It can be a trial and error type thing but they have pretty much done it all.
|
Brett is the man. I am very happy with the prop he did for me. What do you expect, he was trained by the god father when he worked at Merc Racing. If you want to best talk to BBlades!
|
Way to go BBlades. There is no substitute for experience.
Jim |
I too have gotten vary good results with a BBlades modified 28p B1 pushing my little Superboat. No other 4 blade prop has been able to touch this prop.
I sent a 27p M+ out yesterday to Brett to work his magic. I'm quite confident that we will have similar success with the 3 blade. Hey Brett, You'll have my prop on Friday; when should I expect to get it back? No big rush, just asking what the turnaround is these days. |
You guys make this late night work all worth while. I mean that.
I hope Dennis is watching. I miss the guy, he was quite the Dandy! Pat, it's here. |
Brett - I'm going to try out those 5 blade Hydromotives you labbed for me to see if I can get any more rpms with cooler weather approaching.
|
Sounds good.
Wheather and water temps combined with humidity levels are a constant influence. These issues can be a propeller tuners nightmare. Brett |
Brett is great to work with. Has labbed 2 sets of props for two different boats and I would go back. In the marine biz that is as good as gold. (consistency)
|
BRETTS THE BESTIS OUT THERE:p:p:p, I hope to be back on the water this spring so we can test the props that we were going to test before all my chit was stolen:rolleyes:. I am sure DENNIS IS WATCHING WITH A SMILE:D. art
|
| All times are GMT -5. The time now is 12:14 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.