2 Hydromotive Quad IV's 24 pitch
#1
Registered
Thread Starter
Join Date: Jan 2007
Location: Boat-LOTO/Home-St Louis
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
2 Hydromotive Quad IV's 24 pitch
I tried these on my 311 but I could not turn the RPM's. They look great and I used them for a weekend no dings, nicks, scratches. I will aslo include the Bravo 1 Hub kit I used to run them. One Right hand and one Left hand both for $500.
Thanks
Ron
Thanks
Ron
Last edited by MOERON; 09-13-2007 at 01:59 PM.
#2
Registered
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
Ron, what RPMs were you trying to turn? Are they the "cleaver" or "round-ear" style?
From what I remember you've got more power than me and I can turn those 24s to 48-4900...
From what I remember you've got more power than me and I can turn those 24s to 48-4900...
#3
Registered
Thread Starter
Join Date: Jan 2007
Location: Boat-LOTO/Home-St Louis
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
I have 1.36 drive gears only able to turn them at 4600. I have the HP465 Merc 502's that are good for 5300 RPM's I am going to stick with my labbed BBLADES Bravo 1's 24 Pitch that I can turn 4900 to 5000 with. Also these are the cleaver style and they look way better tha bravo 1's but Hydo doesnt think I will get the RPMS's up with labbing them.
Last edited by MOERON; 09-08-2007 at 07:07 PM.
#5
Registered
Join Date: Dec 2003
Location: Raleigh,NC & 1000 Islands,NY
Posts: 1,024
Likes: 0
Received 0 Likes
on
0 Posts
I may want to try those props. Also, why wouldn't labbing add the usual rpm's?
I labbed a set of Hydro's @ Throttle Up and got the extra rpm's.
Currently spinning labbed 26's about 4850; Maybe the 24's will get me up to 5100?
I labbed a set of Hydro's @ Throttle Up and got the extra rpm's.
Currently spinning labbed 26's about 4850; Maybe the 24's will get me up to 5100?
#6
Registered
Thread Starter
Join Date: Jan 2007
Location: Boat-LOTO/Home-St Louis
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Hydro told me they would only go up about 200 RPM's with labbing and I want to be around 5200 so I am way off. I am trying a set of Mirage Plus 23 p labbed from BBLADES after I sell these.
#7
Registered
Join Date: Oct 2004
Location: CHESAPEAKE,VA
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
i have 3 blades 23 and a set of 24's maybe we could work out a deal?? email me if you want baja36ft@yahoo
i will take the hydro's have they ever been work on??
i will take the hydro's have they ever been work on??
Last edited by baja36ft; 09-09-2007 at 12:36 PM.
#8
Registered
Thread Starter
Join Date: Jan 2007
Location: Boat-LOTO/Home-St Louis
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered
Thread Starter
Join Date: Jan 2007
Location: Boat-LOTO/Home-St Louis
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts