Hi I'm looking for a good set of 27 Mirage's that will accept the flow torque 2 hubs for XR's.

email [email protected]


thanks, Dave

I have some 25's that you might be able to massage into 27's

If still looking, we have new stock and Labbed.

Brett you should be one set less after sending mine out last week LOL.

How much difference between the stock and labbed -- I didn't even think to ask while we were on the phone.


Dave

These handles can screw a guy up. Don't know who you are talking to. LOL

Labbed run about 300 rpm higher creating faster top end numbers. They also accelerate faster and smoother.

Brett --

I tried these last night and had a hell of a time getting on plane, actually had to stree parallel to the waves (4ft) in order to get going.
Wasn't able to try any high speed/rpm runs as it was pretty rough. But seem to be close to the right pitch.

Any idea what can be done to these to overcome this situation?

Dave
1-519-919-0878 cell

We need to talk about rotation, prop depth and prop adjustments.