Attn Brett
#1
Registered
Thread Starter
Join Date: May 2007
Location: Georgetown, TX
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
Attn Brett
I've been trying to get a call into you with no luck. Been seeing you browse the board here so I thought I'd have better luck here telling you how the new prop works.
Overall, I'm quite pleased. It comes out of the hole MUCH better than the Hydro and still runs pretty good mid-range. Still not able to get the rpm I need (5300-5400) but it will pull to about 5100 while picking up about 3mph (77mph). Once the weather cools down I expect the motor to make more power and torque to pull it up another 100-150rpm. I can live with that.
Good job!
Clark Bird
Austin, TX
Overall, I'm quite pleased. It comes out of the hole MUCH better than the Hydro and still runs pretty good mid-range. Still not able to get the rpm I need (5300-5400) but it will pull to about 5100 while picking up about 3mph (77mph). Once the weather cools down I expect the motor to make more power and torque to pull it up another 100-150rpm. I can live with that.
Good job!
Clark Bird
Austin, TX
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
Glad to hear about the props. The weather change will make a difference.
You're on my call back list. I'm behind on it again. I do try to answerr a few of these during lunch or at night. Thanks for the understanding
You're on my call back list. I'm behind on it again. I do try to answerr a few of these during lunch or at night. Thanks for the understanding
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]