Michigan Wheel Ballistic Propellers
#1
Registered
Thread Starter
Join Date: Oct 2008
Location: Toms River, NJ
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Michigan Wheel Ballistic Propellers
So I need to get a diffrent pitch prop on my boat. I have found one on ebay and its a MICHIGAN WHEEL BALLISTIC Prop. How are these props. All I have is a 330hp 454 so its not a speed demon, I just need to get the rpms back down to spec's. Thanks
Erik
Erik
#2
Registered
iTrader: (4)
They are a wicked thinned blade prop that has its niche. They usually work well on bass boats, but like any other prop you just have to try it on your hull. If you hull likes it, it can be a sweet prop.
#3
Registered
Thread Starter
Join Date: Oct 2008
Location: Toms River, NJ
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Erik
P.S. right now with the mirage prop on the boat it runs great, rides great but the rpm's are very high for a 330hp 454.
#6
Registered
Thread Starter
Join Date: Oct 2008
Location: Toms River, NJ
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
So its hard to really tell if this prop will be ok or not on my boat..If i can pick it up cheap (hopefully nobody bids on it) i'll try it and if it dosnt work out then I can just relist it forsale.
Bid on ebay is at $99 so hopefully it stays low.
Erik
Bid on ebay is at $99 so hopefully it stays low.
Erik
#7
Registered
check this, it is an "Attwood" Ballistic, proir to michigan buying them out which is a big quality issue, I ran it on my 211 Liberator a while back and it was the sh** on that hull
http://www.speedwake.com/newclassifi...ate=1212764871
http://www.speedwake.com/newclassifi...ate=1212764871
#9
Registered
Thread Starter
Join Date: Oct 2008
Location: Toms River, NJ
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Erik
#10
Registered
Thread Starter
Join Date: Oct 2008
Location: Toms River, NJ
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Erik