Bravo1 VS Hydromotive
05-27-2010 | 08:29 PM
#21
Thread Starter
Registered
Joined: Feb 2006
Posts: 71
Likes: 0
From: Western Canada
Brett BBlades??
I'm sure you'll love them!
By the way, we sell them for $1025.
The Maximus a $1050, and the Maximus Labbed to your boats personality (this is the best all around performer) for $1590.
We also carry the Hering 5 blade (which can be the fastest on the right boat) for $1685.
Thought I'd toss a little advertising out there since I am a paying advertiser on OSO. LOL
Anyway, everybody have a great holiday weekend! I know I will be spending the entire weekend on the water!
Brett
By the way, we sell them for $1025.
The Maximus a $1050, and the Maximus Labbed to your boats personality (this is the best all around performer) for $1590.
We also carry the Hering 5 blade (which can be the fastest on the right boat) for $1685.
Thought I'd toss a little advertising out there since I am a paying advertiser on OSO. LOL
Anyway, everybody have a great holiday weekend! I know I will be spending the entire weekend on the water!
Brett
--------------------------------------------------------------------------------
Just finished install of the Raylay 103 kit, ECM was reprogrammed (5500 limit I think), Dana Flo Torque Headers . My understanding is that this setup should be in the 570 HP range. Have bravo 1 drive with 1.5 gear ratio. Everything seems to be running fine. My Fountain report stated 19 1/2" X dimension and 69 MPH with a 26" Bravo 1 prop, best I have seen is 67 MPH (GPS)
Testing the past 2 weekends:
28" Bravo 1 Prop, 5025 RPM, 70 MPH (GPS)
26" Bravo 1 Prop, 5500 RPM, 69 MPH (GPS).
I was able to easily blow out the 26" prop and had to be careful with the throttle.
Have passed the info over to Julie at Throttle Up and she was waiting on my 26" test; passed info on to Brett BBlades but no response.
To be honest I was hoping to be knocking on the 80MPH mark. Looking for any input. I am not 100% convinced the Bravo 1 is the prop for this application. Have sent you prior email Brett on my application. Can you help? Thanks
05-28-2010 | 12:50 PM
#22
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Pete,
I have responded to your emails.
Sorry for the delay.
I have responded to your emails.
Sorry for the delay.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
05-28-2010 | 01:23 PM
#23
Charter Member #94
Joined: Oct 2000
Posts: 2,694
Likes: 5
From: Sunrise Beach MO
I was expecting a somewhat different answer from Brett, Julie, or any of the other pro prop shops
I see a lot of questions about top end speed, which brand, or type of blade is better. I guess my answer would have been a whole lot more questions, I.E. twin-step or straight hull? Big water/slop & chop racing or calm river Kilo speed? etc.
Maybe I've missed a post (or7), but we had a wall full of props to choose from depending the day...
I see a lot of questions about top end speed, which brand, or type of blade is better. I guess my answer would have been a whole lot more questions, I.E. twin-step or straight hull? Big water/slop & chop racing or calm river Kilo speed? etc.
Maybe I've missed a post (or7), but we had a wall full of props to choose from depending the day...
__________________
Abby-someone
Abby-someone
05-29-2010 | 05:59 AM
#24
Registered
Joined: Aug 2009
Posts: 89
Likes: 0
BBLADES has all these propellers for testing for a $40 fee with a 15 trial period with no strings attached.
http://www.bblades.com/pressreleases...essReleaseID=3
Brett
