Where 2 Start
 

I HAVE A BAJA 226 WITH A 350 LIL BIGGER CAM IT HAS A 21P ALUMINUM PROP WOT IS RIGHT AROUND 4500 AT 52MPH SHOULD I GO WITH A SS21P OR LOWER THE PITCH TO LIKE A 19P ? SHOULD IT HAVE A FEW MORE RPM'S OR IS THAT JUST ABOUT RIGHT THANKS..................help

Go with a 21 Mirage+. I would suggest a labbed one. Should give you a couple of rpm's.

+1 on that=21mirage if you get it from bblades he has a swap prop program so if you need to try more than one prop. also if the 21 is near your rpm range he can lab it like said above for full performance

ill give them a call thanks alot

You are very welcome. Tell us about the results, when you have tried some props.

will do !!!!!!!!!

Boltspeedmen

Any news on your prop testing?

I would think you will need a 19" to get the rpms up some. Also, aluminum props flex and loose pitch with more rpm.

+1

Suggestion was to lab a 21", so that the rpm's came up to get the bigger top end number. But yes a 19" stock prop sounds about right, too.

workin some overtime 2 get some extra cash 4 the prop , as soon as i do ill give u a report :drink: