Where 2 Start
#1
Registered
Thread Starter
Join Date: Jan 2010
Location: detroit
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Where 2 Start
I HAVE A BAJA 226 WITH A 350 LIL BIGGER CAM IT HAS A 21P ALUMINUM PROP WOT IS RIGHT AROUND 4500 AT 52MPH SHOULD I GO WITH A SS21P OR LOWER THE PITCH TO LIKE A 19P ? SHOULD IT HAVE A FEW MORE RPM'S OR IS THAT JUST ABOUT RIGHT THANKS..................help
#3
Registered
Join Date: Dec 2000
Location: EASTON MA.
Posts: 6,281
Likes: 0
Received 0 Likes
on
0 Posts
+1 on that=21mirage if you get it from bblades he has a swap prop program so if you need to try more than one prop. also if the 21 is near your rpm range he can lab it like said above for full performance
#9
Registered
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Griff
I would think you will need a 19" to get the rpms up some. Also, aluminum props flex and loose pitch with more rpm.
Suggestion was to lab a 21", so that the rpm's came up to get the bigger top end number. But yes a 19" stock prop sounds about right, too.