Fitting Hub Kits
05-19-2011 | 08:54 PM
#1
Thread Starter
RIPSTA Racing Team
Joined: Nov 2008
Posts: 2,093
Likes: 1
From: Philadelphia, PA
Fitting Hub Kits
OK, so how snug should the hub fit into the prop? Mine seem kinda loose and I'm concerned about movement back and forth during shifting and wake force on the props. I'm running bravo 1, 4 blade, 36P, on Imco -2 shortie lowers, 1 1/4" shafts I'm not sure of the PN# of the hub kits I have are , their solid silver metal with flat rubbers.
05-20-2011 | 05:15 PM
#3
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
We have them in stock.
Call us and we'll get them shipped right out.
Brett
Call us and we'll get them shipped right out.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
05-25-2011 | 10:14 AM
#5
Registered
Joined: Apr 2007
Posts: 1,130
Likes: 2
From: Northern, KY (Cincinnati) Lake St Clair, MI Norris Lake, TN
05-25-2011 | 12:03 PM
#6
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
920-295-4435
Thank you,
Brett
Thank you,
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
