1984 checkmate prop help?
#11
Registered
Joined: Apr 2009
Posts: 1,852
Likes: 1
From: Denmark and hopefully some place nice
#12
Thread Starter
Registered
Joined: Jun 2011
Posts: 8
Likes: 0
Well got to run it last night. A bit windy and really bad chop but still got some good results. 3 people on the boat and a half tank. Ran 65mph gps at 4800rpm. That gives me a 7% slip if i'm correct. It holds the bow way better than my other 2 props. Hole shot was decent too. I want play with the pvs vent plugs and see if I can fine tune it. All in all it was 300 bucks out the door with a brand new flow torque hub kit. I'm very happy with the LaserII.
#13
Registered
Joined: Apr 2009
Posts: 1,852
Likes: 1
From: Denmark and hopefully some place nice
Well got to run it last night. A bit windy and really bad chop but still got some good results. 3 people on the boat and a half tank. Ran 65mph gps at 4800rpm. That gives me a 7% slip if i'm correct. It holds the bow way better than my other 2 props. Hole shot was decent too. I want play with the pvs vent plugs and see if I can fine tune it. All in all it was 300 bucks out the door with a brand new flow torque hub kit. I'm very happy with the LaserII.



