#5 Drive props?
04-19-2012 | 12:29 PM
#11
Thread Starter
Registered
Joined: Mar 2012
Posts: 11
Likes: 0
From: Lake City MI
04-19-2012 | 10:52 PM
#13
Charter Member #394
Joined: Nov 2000
Posts: 534
Likes: 38
From: CA
[QUOTE=lerg948;3667897]
Yep, I have a 16.75 x 28.2 cleaver
and a 14.75 x 30.5 rounded ear cleaver done by Merc Racing "for bow lift", I have the paperwork.
Both props have been prop scanned so the above numbers are exact; I have the printouts.
They are $450 each, both in perfect shape.
and a 14.75 x 30.5 rounded ear cleaver done by Merc Racing "for bow lift", I have the paperwork.
Both props have been prop scanned so the above numbers are exact; I have the printouts.
They are $450 each, both in perfect shape.
04-20-2012 | 12:13 PM
#15
Thread Starter
Registered
Joined: Mar 2012
Posts: 11
Likes: 0
From: Lake City MI
[QUOTE=SFOcean;3668359]Thanks man! I def dont need bow lift, might be interested in the cleaver, ill get back with ya!!
04-23-2012 | 11:25 AM
#18
Thread Starter
Registered
Joined: Mar 2012
Posts: 11
Likes: 0
From: Lake City MI
I was wrong on original prop! Guy i picked the boat up from was an idiot! LOL, its actually a 32x 16.75 gonna try a 29, Talked to bblades figured it would get me close
05-13-2012 | 02:35 AM
#19
Registered
Joined: Oct 2004
Posts: 616
Likes: 1
From: Portland, OR
Well here s the whole deal! Im buying a 28 ft cat, dynoed at 930 at 5900, #5 drive, the guy is only 4900 with a 26, Was told i couldnt get props for a #5 , so wanted to do some checking, not sure what gear ratio and diamater. Single motor. Thanks guys, any info or suggestions is much appreciated!
Never mind, got down to the last post...
