Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Prop Talk (https://www.offshoreonly.com/forums/prop-talk-165/)
-   -   Blackhawk 2 bravo1- HELP (https://www.offshoreonly.com/forums/prop-talk/277964-blackhawk-2-bravo1-help.html)

shane5096667 06-04-2012 06:59 PM

Blackhawk 2 bravo1- HELP
 
Two weekends ago I launched my Formula 303sr1 at 84mph over a wave and out of the water, before the starboard drive touched back down I didn't have time to get off the throttle, with that said, the Blackhawk on the starboard side needed replaced, instead of buying another expensive hard to find Blackhawk I purchased 2 new bravo1's, I need help from some of you guys that have more experience than me, what is the best pitch prop to get top speed for this boat with the bravo 1's, 4 blade,3 blade? I know with the bravos I am not going to be in the 80mph bracket anymore. >:(The twin motors are 502mpi 415hp each. Any help will be greatly appreciated.

craigdskilling 06-04-2012 07:29 PM

Sorry to here about your drives.I have a 18 donzi running a blackhawk drive with 31 props love the set up.what is your ratio on your drive.there out there to find.if you like them get an other.

craigdskilling 06-04-2012 07:31 PM

What are you doing with the old drives and props might be interested.thanks craig.

shane5096667 06-04-2012 08:13 PM

Iv got the good drive for sale 1.5 gear

shane5096667 06-05-2012 07:16 AM

A boater from another website suggested a 25 pitch marige 3 blade for my bravo1. Does this sound right anyone???

bbladesprops 06-05-2012 06:20 PM

Depends what Blackhawk props were on the boat.

We do have test propellers and can offer you some set up assistance.
Let us know what we can do to help.

Brett

shane5096667 06-05-2012 08:47 PM

Blackhawk props where 29 pitch.

bbladesprops 06-06-2012 02:29 PM

I'd start with a set of 30's and bet a baseline.
Let us know if you need test props.

Brett

glashole 06-06-2012 02:52 PM

did you blow the actual case apart?

why not just replace the gears in the blackhawk

bor 06-06-2012 03:24 PM


Originally Posted by glashole (Post 3704166)
did you blow the actual case apart?

why not just replace the gears in the blackhawk

All parts in the upper are the same as bravo 1 except the vertical shaft that s a short one and not available thru mercury but max works have them ,they even can swap it in to a xr blackhawk but that cost some $$$

shane5096667 06-07-2012 10:56 PM


Originally Posted by bor (Post 3704188)
All parts in the upper are the same as bravo 1 except the vertical shaft that s a short one and not available thru mercury but max works have them ,they even can swap it in to a xr blackhawk but that cost some $$$

I snaped the shaft. I purchased two bravo ones form max works for a little more than the cost of 1 blackhawk.

shane5096667 06-07-2012 11:07 PM

Thanks Brett, I called ur shop & tlked 2 Brent He suggested to start with 28's I'm going to try my 25's next weekend to see where my wot is, then I may in role in you
r test prop program.


All times are GMT -5. The time now is 06:32 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.