Go Back  Offshoreonly.com > Technical > Prop Talk
Blackhawk 2 bravo1- HELP >

Blackhawk 2 bravo1- HELP

Notices

Blackhawk 2 bravo1- HELP

Thread Tools
 
Old 06-04-2012, 06:59 PM
  #1  
Registered
Thread Starter
 
Join Date: May 2012
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default Blackhawk 2 bravo1- HELP

Two weekends ago I launched my Formula 303sr1 at 84mph over a wave and out of the water, before the starboard drive touched back down I didn't have time to get off the throttle, with that said, the Blackhawk on the starboard side needed replaced, instead of buying another expensive hard to find Blackhawk I purchased 2 new bravo1's, I need help from some of you guys that have more experience than me, what is the best pitch prop to get top speed for this boat with the bravo 1's, 4 blade,3 blade? I know with the bravos I am not going to be in the 80mph bracket anymore. >The twin motors are 502mpi 415hp each. Any help will be greatly appreciated.
shane5096667 is offline  
Old 06-04-2012, 07:29 PM
  #2  
Registered
 
Join Date: Nov 2010
Posts: 70
Likes: 0
Received 1 Like on 1 Post
Default

Sorry to here about your drives.I have a 18 donzi running a blackhawk drive with 31 props love the set up.what is your ratio on your drive.there out there to find.if you like them get an other.
craigdskilling is offline  
Old 06-04-2012, 07:31 PM
  #3  
Registered
 
Join Date: Nov 2010
Posts: 70
Likes: 0
Received 1 Like on 1 Post
Default

What are you doing with the old drives and props might be interested.thanks craig.
craigdskilling is offline  
Old 06-04-2012, 08:13 PM
  #4  
Registered
Thread Starter
 
Join Date: May 2012
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Iv got the good drive for sale 1.5 gear
shane5096667 is offline  
Old 06-05-2012, 07:16 AM
  #5  
Registered
Thread Starter
 
Join Date: May 2012
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

A boater from another website suggested a 25 pitch marige 3 blade for my bravo1. Does this sound right anyone???
shane5096667 is offline  
Old 06-05-2012, 06:20 PM
  #6  
Offshoreonly Advertiser
Offshoreonly Advertiser
 
bbladesprops's Avatar
 
Join Date: Jun 2003
Location: Princeton, Wisconsin
Posts: 3,875
Received 46 Likes on 13 Posts
Smile

Depends what Blackhawk props were on the boat.

We do have test propellers and can offer you some set up assistance.
Let us know what we can do to help.

Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
bbladesprops is offline  
Old 06-05-2012, 08:47 PM
  #7  
Registered
Thread Starter
 
Join Date: May 2012
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Blackhawk props where 29 pitch.
shane5096667 is offline  
Old 06-06-2012, 02:29 PM
  #8  
Offshoreonly Advertiser
Offshoreonly Advertiser
 
bbladesprops's Avatar
 
Join Date: Jun 2003
Location: Princeton, Wisconsin
Posts: 3,875
Received 46 Likes on 13 Posts
Smile

I'd start with a set of 30's and bet a baseline.
Let us know if you need test props.

Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
bbladesprops is offline  
Old 06-06-2012, 02:52 PM
  #9  
Registered
 
Join Date: Mar 2011
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

did you blow the actual case apart?

why not just replace the gears in the blackhawk
glashole is offline  
Old 06-06-2012, 03:24 PM
  #10  
bor
Registered
iTrader: (1)
 
bor's Avatar
 
Join Date: Oct 2007
Location: uithoorn,the netherlands
Posts: 728
Received 4 Likes on 2 Posts
Default

Originally Posted by glashole
did you blow the actual case apart?

why not just replace the gears in the blackhawk
All parts in the upper are the same as bravo 1 except the vertical shaft that s a short one and not available thru mercury but max works have them ,they even can swap it in to a xr blackhawk but that cost some $$$
bor is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.