What do these props fit?
09-09-2012 | 02:19 PM
#1
Thread Starter
Platinum Member
Joined: Dec 2001
Posts: 2,125
Likes: 169
From: St. Clair Shores, MI
What do these props fit?
I bought this set of props earlier this year and just found out that they don't fit. They are 3 blade cleavers and are marked 15x22R and 15x22L They are 15 spline and fit what appears to be a 7/8" shaft. The guy I got them from said they were off his Scarab, but it was my mistake to not verify the spline count. I currently have 15x23, 19 spline 3 blade cleavers on SSM II drives, and I'm looking for a spare set if anyone has something in that size range.
09-10-2012 | 10:16 AM
#3
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Look like old OB cleavers.
Non Labbed. Stock configuration. Are there any other stampings on the hubs?
Brett
Non Labbed. Stock configuration. Are there any other stampings on the hubs?
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
09-10-2012 | 08:06 PM
#4
Registered
Joined: Nov 2005
Posts: 635
Likes: 2
From: cincinnati ohio
I bought this set of props earlier this year and just found out that they don't fit. They are 3 blade cleavers and are marked 15x22R and 15x22L They are 15 spline and fit what appears to be a 7/8" shaft. The guy I got them from said they were off his Scarab, but it was my mistake to not verify the spline count. I currently have 15x23, 19 spline 3 blade cleavers on SSM II drives, and I'm looking for a spare set if anyone has something in that size range.
