Breaking Maximus props on a 38zr
09-09-2013 | 03:00 PM
#11
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
I have lost blades on 3 of my Maximus props since 2009 on my ZR. Think Donzi has the X dimension too high for max performance not considering that the customer is stuck with a constant cycle of buying new props. I think the answer may be to sacrifice some speed and put spacers in to get the props more in the water as stated above. I have yet to do that.
Bob
Bob
There are many ZR's that break propellers due to the high X and super aerated water. Reducing drive height can make the boat friendly boat for planning and prop wear but can also decrease the top number.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
