|
Reduce rpms with Maximus prop
I' m trying to decide how to reduce my max rpm with a Maximus prop. I want to purchase a second prop but would like to reduce my rpm's by about 100-150, the prop I run now is a 15.25x30 short tube merc labbed Maximus but I can't decide if I should get a little larger dia. or maybe ever a 31p or have someone ad some more cupping to a 30p like I have. Any suggestions would be appreciated.
Thanks |
The easiest route is to add the correct amount of cup in the correct location.
This should only be done to that recipe if the boat attitude and performance are where you like it or it should be performing. We would ask you a variety of questions which would point us in the correct direction. We have our winter labor special happening now so this is a great time to do the work if it interests you. Brett |
t
Originally Posted by bbladesprops
(Post 4065534)
The easiest route is to add the correct amount of cup in the correct location.
This should only be done to that recipe if the boat attitude and performance are where you like it or it should be performing. We would ask you a variety of questions which would point us in the correct direction. We have our winter labor special happening now so this is a great time to do the work if it interests you. Brett Thanks Again John |
Originally Posted by sport
(Post 4065649)
t
Thanks for the reply Brett I have tried to contact you a few time in the last month but can never seen to catch you but I know that you are probably very busy I will keep tring. Thanks Again John Let us know how we can help. Brett |
| All times are GMT -5. The time now is 06:33 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.