I' m trying to decide how to reduce my max rpm with a Maximus prop. I want to purchase a second prop but would like to reduce my rpm's by about 100-150, the prop I run now is a 15.25x30 short tube merc labbed Maximus but I can't decide if I should get a little larger dia. or maybe ever a 31p or have someone ad some more cupping to a 30p like I have. Any suggestions would be appreciated.
Thanks

The easiest route is to add the correct amount of cup in the correct location.

This should only be done to that recipe if the boat attitude and performance are where you like it or it should be performing.
We would ask you a variety of questions which would point us in the correct direction.
We have our winter labor special happening now so this is a great time to do the work if it interests you.

Brett

tThanks for the reply Brett I have tried to contact you a few time in the last month but can never seen to catch you but I know that you are probably very busy I will keep tring.
Thanks Again
John

I believe you spoke with Brad here today.
Let us know how we can help.

Brett