|
my nova with 23 mirages did 63 at 5200. tnc110 you have a 1.36 drive. put in gear, mark prop blade that is straight up. mark balancer. turn motor 1.5 rotations. prop will have turned just over 1 full revolution. easier to do with drive off boat. but definately run the paid-for prop and see what you get. just be ready to pull back on the throttle to keep it under the revs u decided u aren't going past.
|
maybe I have a 1.36 now, but I will be running a 1.5 with the new engine.
|
Originally Posted by tpabayflyer
(Post 4150425)
My 26ZX spins a Bravo 1 26P to 4900rpm at 69mph.... This was into the wind and against the current so I think it has a few more mph in ideal conditions....Motor is a new 502 with ported aluminum heads and 10-1 C/R and was not dyno'd but I would say around 600 ft/lbs torque is pretty close..... cruise is awesome @50mph at 3,500rpm so I think this is the perfect prop...... Your motor with a little more power and a little lighter hull should get you up to the mid 70's I bet....... I also think the 26P will work the best for you... TBF
|
| All times are GMT -5. The time now is 03:20 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.