Go Back  Offshoreonly.com > Technical > Prop Talk
End of summer special. >

End of summer special.

Notices

End of summer special.

Old 09-08-2014 | 08:08 PM
  #1  
bbladesprops's Avatar
Thread Starter
Offshoreonly Advertiser
20 Year Member
Offshoreonly Advertiser
 
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Smile End of summer special.

For more information, contact us here or call 920-295-4435.
BBLADES can also be found on Facebook.





BBLADES Back-to-School-End-of-Summer Sale

BBLADES Professional Propellers wants to help you squeeze in as much boating as you can during these last days of summer, so during the month of September we’re offering free ground shipping on any prop repairs or lab finishing; just make sure we receive your props by September 30th to take advantage of this great deal.

From minor dings and dents that can lead to future failures to complete blueprinting, BBLADES’ pros have nearly 100 years of hands-on prop science experience that will get your prop good as new, or in some cases, better than new; and during the month of September, shipping is free. We’ll even deduct the price of your in-bound shipping from the repair cost for totally free shipping.

This offer is good only for the month of September, 2014, for propeller repair or lab finishing, and covers regular ground shipping in the Continental United States only. Make sure you print the coupon to receive this September sale, which can be found at www.bblades.com

###



Join Us On Facebook!
Join our BBLADES Facebook page and invite your friends along for the ride. You’ll find helpful prop information, sure, but also boating safety info, some fun and funny stuff and boating events from Poker Runs to Fishing Tournaments scattered through the country – and the world!

From time-to-time we’ll be holding contests or just giving things away because we like to do that every now and then. Do you have a boating related event happening? We’d love to help you promote it to our worldwide group of friends and fellow boaters. And you’ll be able to take advantage of Facebook-Only Special Offers. So come on and give us a “like,” you’ll be glad you did.


Copyright © 2014 BBLADES Professional Propellers, All rights reserved.


Our mailing address is:
BBLADES Professional Propellers
N5007 Highway 73
Princeton, WI 54968
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]

Last edited by bbladesprops; 09-10-2014 at 10:44 AM. Reason: clarification
bbladesprops is offline  
Reply
Old 09-16-2014 | 01:36 PM
  #2  
bbladesprops's Avatar
Thread Starter
Offshoreonly Advertiser
20 Year Member
Offshoreonly Advertiser
 
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Default

Just keeping it fresh since Sept. is flying by!
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
bbladesprops is offline  
Reply
Old 09-17-2014 | 06:16 PM
  #3  
Registered
20 Year Member
 
Joined: Jan 2004
Posts: 5,325
Likes: 112
From: Northern NY
Default

Would be more than interested in trying a set of Hydro P5X 30's then having them or 31's done up for the Fountain, any in house to send out for testing?
RaggedEdge is offline  
Reply
Old 09-18-2014 | 10:57 AM
  #4  
bbladesprops's Avatar
Thread Starter
Offshoreonly Advertiser
20 Year Member
Offshoreonly Advertiser
 
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Default

Unfortunately we do not have 30 P5X props at this time. Hydromotive isn't even ordering any more castings from the foundry this season.
We do however, have a set of stock 31's that you would be able to test. From there we would be able to better determine what recipe would work best with your boat set up.


Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
bbladesprops is offline  
Reply
Old 09-18-2014 | 03:03 PM
  #5  
On Time's Avatar
Registered
20 Year Member
 
Joined: Nov 2004
Posts: 3,581
Likes: 3
From: Houston
Default

Hello Brett, stock 28 Maximus props ran through sand and got a little burred up. Cost to check and fix that or is even needed? Thanks.
On Time is offline  
Reply
Old 09-18-2014 | 06:25 PM
  #6  
bbladesprops's Avatar
Thread Starter
Offshoreonly Advertiser
20 Year Member
Offshoreonly Advertiser
 
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Default

Originally Posted by On Time
Hello Brett, stock 28 Maximus props ran through sand and got a little burred up. Cost to check and fix that or is even needed? Thanks.
Hello,

We do inspections and estimates for free and always have. Repairs are based on time to complete. We charge $98/hr. and break it into 15 minute increments. It is really pretty tough to guess without seeing the project. It could be $49 or $245. Obviously the shipping is currently free both directions so now is a good time to do it if your needing repairs.

I hope we can work together. Thank you,
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
bbladesprops is offline  
Reply
Old 09-25-2014 | 12:25 PM
  #7  
bbladesprops's Avatar
Thread Starter
Offshoreonly Advertiser
20 Year Member
Offshoreonly Advertiser
 
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Default

TTT

A reminder time is up on the free shipping "both ways" sale next Tuesday.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
bbladesprops is offline  
Reply
Old 10-03-2014 | 06:02 PM
  #8  
Registered
20 Year Member
 
Joined: Jan 2004
Posts: 5,325
Likes: 112
From: Northern NY
Default

Originally Posted by bbladesprops
Unfortunately we do not have 30 P5X props at this time. Hydromotive isn't even ordering any more castings from the foundry this season.
We do however, have a set of stock 31's that you would be able to test. From there we would be able to better determine what recipe would work best with your boat set up.


Brett

Sorry I missed this, been busy with biz chit. However...............

Have run some 31's and felt they had a little bit much tail lift, have run some 29's and they felt real good, good boat attitude, but just ran out of bite on the top end, on the limiters. Was hoping to get my hands on a set of 30's to try, or a set that has been tweeked to settle them down, maybe?
RaggedEdge is offline  
Reply
Old 10-06-2014 | 07:19 PM
  #9  
bbladesprops's Avatar
Thread Starter
Offshoreonly Advertiser
20 Year Member
Offshoreonly Advertiser
 
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Smile

Originally Posted by RaggedEdge
Sorry I missed this, been busy with biz chit. However...............

Have run some 31's and felt they had a little bit much tail lift, have run some 29's and they felt real good, good boat attitude, but just ran out of bite on the top end, on the limiters. Was hoping to get my hands on a set of 30's to try, or a set that has been tweeked to settle them down, maybe?
Typically we have the entire line on Hydro P5X's for testing but as I referenced earlier, they have scaled back their operation and we are out of some of the inventory due to lack of availability.
I would call us and we can discuss the options available from other sources. We can try to get some performance numbers this fall to get ready for the spring or discuss a game plan for after the start of the year.

Let me know how we can help.

Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
bbladesprops is offline  
Reply
Old 10-06-2014 | 08:17 PM
  #10  
Registered
 
Joined: Oct 2005
Posts: 5,825
Likes: 612
From: Clarkston, Michigan
Default

I'm gonna hit you up in January when things are REALLY slow.
thirdchildhood is offline  
Reply

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.