Go Back  Offshoreonly.com > Technical > Prop Talk
Prop Nut Torque >

Prop Nut Torque

Notices

Prop Nut Torque

Thread Tools
 
Old 08-05-2019, 01:44 PM
  #11  
Registered
 
Join Date: Oct 2016
Location: Buffalo, NY
Posts: 553
Received 1 Like on 1 Post
Default

What BBLADES said. ^^^^^. 55lbs nope!!!. The nut will loosen. 2x4 in between cav plate and prop 65- 75ft lbs , i like 75 with a little grease. Check it after an outing then again after few more. Especially on new props and hubs. Its a 3/4 nut you wont hurt it.
yeah old thread i know. I have had bolts loosen a couple times on different boats, now they get tightened. Last year one guy lost a prop another guy, bolt came loose. Both of them torqued to 55. Didnt want hear my story.
veloc410 is offline  
Old 08-05-2019, 04:16 PM
  #12  
Offshoreonly Advertiser
Offshoreonly Advertiser
 
bbladesprops's Avatar
 
Join Date: Jun 2003
Location: Princeton, Wisconsin
Posts: 3,875
Received 46 Likes on 13 Posts
Smile

Originally Posted by veloc410
What BBLADES said. ^^^^^. 55lbs nope!!!. The nut will loosen. 2x4 in between cav plate and prop 65- 75ft lbs , i like 75 with a little grease. Check it after an outing then again after few more. Especially on new props and hubs. Its a 3/4 nut you wont hurt it.
yeah old thread i know. I have had bolts loosen a couple times on different boats, now they get tightened. Last year one guy lost a prop another guy, bolt came loose. Both of them torqued to 55. Didnt want hear my story.

It's not what I say it is what Mercury says. I typically over tighten too. (without even realizing it.)
But, with a new fiberlock nut, 55 lbs. is fine.

Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
bbladesprops is offline  
Old 08-07-2019, 06:44 PM
  #13  
Registered
 
Join Date: Jan 2004
Location: Northern NY
Posts: 5,325
Likes: 0
Received 112 Likes on 44 Posts
Default

I set the torque wrench at 65 and use a touch of blue locktite as well. Let it set overnight and good to go. Never lost one yet. Have seen a set take the deep dive, not mine, at the Merc clean 55 and good to go. That marina employee adjusted his procedure on the bosses boat to 75 and red!
RaggedEdge is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.