Mach 22 / 22 daytona info
#1
Registered
Thread Starter
Join Date: Sep 2017
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Mach 22 / 22 daytona info
I am looking for anyone who may be able to provide any set up info on a dcb mach 22 or 22 Daytona sterndrive with power in 600-700 hp range. I am running a mach 22 sterndrive with a bbc dynoed at 670hp at 6100 rpm and 620tq at 5300 rpm. bravo xr drive 1.5 gear, imco -2 lower unit. currently have a 26p bravo 1 prop spinning 5900 rpm at 90mph. tried a 26p 5 blade which the boat didn't like. does anyone have any experience or know anyone with a similar set up? I'm wondering if there is any more mph to be had
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
Your slip is very low so I would send us the prop for Labbing and you should see 6100 and a couple mph. We have Labbed many B1's for these applications.
Another suggestion would be BBLADES 4-SPEED reduced in diameter and Labbed but the B1 is doing quite well and you own it so it makes sense to stay with it.
Brett
Another suggestion would be BBLADES 4-SPEED reduced in diameter and Labbed but the B1 is doing quite well and you own it so it makes sense to stay with it.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]