|
Originally Posted by kjberman
(Post 4660569)
Mark....out of the box I picked up 8mph at 3500rpm, and ran the same top end as a set of Mercury labbed Bravo’s. However, when I ran it wide open it was 90 and humid, full of fuel, 4.adults and my daughter. Pretty sure they would run a couple MPH faster with less temperature and humidity. I’m not as concerned about the top end, but the cruise speed really made it worth it, imo. For reference I tried a set of P5X’s (labbed) and saw no difference than my Bravos....all props are 32’s. Hope this info is helpful. Kevin Very helpful! What is the RPM difference between the labbed Bavo 1 32's and the 5 Speed 32.s? Your midrange results are about the same as when I went from the factory installed Mirage + to the Barvo 1's years ago. Mark |
Mark: 5 speeds, with conditions as described I could only spin 5100. Plan is to lab them for another 100-200 rpm. Labbed 32 Bravos, 5400. I imagine I’ll squeak a couple more mph at WOT., especially if it wasn’t 90 and humid... However, a buddy tried a set on his 40’ outlaw with 575’s and saw zero improvements across the board. Limited trial, but I have a stepped hull....the outlaw doesn’t. Additionally, they carried my hull nicely, and all around provided a nicer ride. I was more than satisfied as most of the time we run 3500-4000..... Again, hope this was helpful.. Kevin |
Originally Posted by kjberman
(Post 4660594)
Mark: 5 speeds, with conditions as described I could only spin 5100. Plan is to lab them for another 100-200 rpm. Labbed 32 Bravos, 5400. I imagine I’ll squeak a couple more mph at WOT., especially if it wasn’t 90 and humid... However, a buddy tried a set on his 40’ outlaw with 575’s and saw zero improvements across the board. Limited trial, but I have a stepped hull....the outlaw doesn’t. Additionally, they carried my hull nicely, and all around provided a nicer ride. I was more than satisfied as most of the time we run 3500-4000..... Again, hope this was helpful.. Kevin Glad you mentioned the 40 Outlaw since mine is a 36 Outlaw with somewhat the same power level. No steps, deep drive etc.. More than likely not worth it for my application. I will be talking with Brett soon as my Bravo 1's need a bit of refreshing. I will get his thoughts at that point. Thanks! Mark |
Nobody has run the Merc Max5??
|
I have customers who have and we have repaired some. As I said earlier, quite mixed reviews. Initially the reviews all stunk. But know more and more the reviews are getting better. I'm sure it is due to more applications are trying them.
What application are you wanting to put them on? Brett |
35ft Donzi ZR
|
And soon to be REV Limiting on both engines ^^^^^^^
|
Originally Posted by kjberman
(Post 4660594)
Mark: 5 speeds, with conditions as described I could only spin 5100. Plan is to lab them for another 100-200 rpm. Labbed 32 Bravos, 5400. I imagine I’ll squeak a couple more mph at WOT., especially if it wasn’t 90 and humid... However, a buddy tried a set on his 40’ outlaw with 575’s and saw zero improvements across the board. Limited trial, but I have a stepped hull....the outlaw doesn’t. Additionally, they carried my hull nicely, and all around provided a nicer ride. I was more than satisfied as most of the time we run 3500-4000..... Again, hope this was helpful.. Kevin I've also got an AT 37. Right now I'm running 32 labbed Bravo's with 525's. I just bought the boat, so I cannot comment at all on how the boat handles with the Bravos. The previous owner mostly ran a set of 30 PX5's for the improved hole shot, but lost a few MPH over the Bravos. I believe that he saw 84 +/- with the PX5's and 86-87 with the labbed Bravo's. The original owner of the boat tried a set of 5 blade Herrings and saw 90, but the planning time was terrible. So what are your actual top end numbers with the 5-speeds, and are yours stock or labbed? Mike |
Mike: Left you a PM Kevin |
| All times are GMT -5. The time now is 04:28 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.