Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Prop Talk (https://www.offshoreonly.com/forums/prop-talk-165/)
-   -   87 Baja 240 sport Prop question. (https://www.offshoreonly.com/forums/prop-talk/352929-87-baja-240-sport-prop-question.html)

Bigjohnbaja 03-20-2018 09:11 PM

87 Baja 240 sport Prop question.
 
I have an 87 240 sport, with a 496 stroker putting down about 550hp. I’m swapping the alpha for a bravo 1, but I got a smokin deal on a 1.36 gear ratio. Does anyone know what prop I should start with?

mickeymcclgn 03-20-2018 10:13 PM


Originally Posted by Bigjohnbaja (Post 4617140)
I have an 87 240 sport, with a 496 stroker putting down about 550hp. I’m swapping the alpha for a bravo 1, but I got a smokin deal on a 1.36 gear ratio. Does anyone know what prop I should start with?

23mirage 3 blade. Or a 22p bravo 4 blade. Depending on what rpm you’re looking to turn. Being that far in the basement with the propshaft the 3 blade will be the faster prop and 4 blade will cruise better but could porpoise.

Griff 03-21-2018 01:10 AM

/\/\/\/\/\/\/\/\/\ What he said

I could spin a 23 Mirage + to 5450 with about 420hp on my 93 24 Outlaw with a 1.5.
With your additional HP, you should be close to the right WOT rpm with the 1.36.

Bigjohnbaja 03-25-2018 04:39 PM

Thanks guys for the input. I will try it and let you know how it goes.

veloc410 03-25-2018 05:34 PM

I had 1992 24 outlaw 502 390 hp 1.5 gear 25 pitch 3 blade mirage. 5000 rpm 68 -70 mph. Liked that boat. 24 degree, trailered nice, fast and efficient

https://photos.app.goo.gl/uAwqBtCL39LUVMXh2

veloc410 03-25-2018 05:36 PM

https://photos.app.goo.gl/uAwqBtCL39LUVMXh2

bbladesprops 03-27-2018 01:45 PM

Our 23 OB/FX 4 blade would be a good candidate. These props have a ton of bow lift built into them.
Get a baseline with whatever prop you can find and post the results and we can go from there.
1.36 gears from 1.50 gears require down sizing about 2 inches of pitch.

Brett

Bigjohnbaja 03-28-2018 08:54 AM

Thanks Brett. I appreciate your input. I see your name mentioned a lot. I will be in touch with you

Trash 04-01-2018 08:45 PM

I would add a 21 or 23" Rev 4 in the mix as well. Due to the larger blade area a 21" Rev 4 will load the motor like a 23" Mirage. A 23" Rev 4 will load the motor like a 25" Mirage etc. Slip, trim and handling characteristics will be much different between the two styles.


All times are GMT -5. The time now is 08:32 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.