Prop Hub Play
#1
Registered
Thread Starter
Prop Hub Play
Over the weekend I changed props and noticed one hub had some play within the prop and the other was rock solid. Do these things wear out? Flo-Torque II Solid Hub Kit 1.25” shaft.
#3
Registered
Thread Starter
#4
Offshoreonly Advertiser
Offshoreonly Advertiser
We carry snubber kits which can snug up the inserts.
Here is a link.
https://bblades.com/shop/accessories...-strip-kit-hd/
Brett
Here is a link.
https://bblades.com/shop/accessories...-strip-kit-hd/
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#6
Offshoreonly Advertiser
Offshoreonly Advertiser
Yes. The hub and propeller are cast. There are tolerances and if they are each at max of the opposite ends we can have additional play. This is of no concern since we still have a square plug in a square hole.
Make sure the prop nt is tigh and there should be no prop rattle.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]